2024 NEW HOLLAND W80C

2024

5

FNHW80CHNRHP07307

New

Accurate / Verified

31494

This new 2024 New Holland W80C HS (High Speed) is a compact wheel loader designed for high-production, tight-space operations, offering significant perks in speed, stability, and operator comfort. The "High Speed" variant reaches travel speeds up to 21.7 mph, making it ideal for fast, repetitive loading and material handling tasks. THIS MACHINE IS EQUIPPED WITH: • Air Conditioner with Heater • Internal Covers for Side Pillars, Metal A/C Vents • Side Storage Box • Fully Adjustable Steering Column (Telescopic/Tiltable) with Cover • Two Position Side Window (Partial/180°) and Rear View Mirror • Air Seat • 4WD • Auto Ride Control • LED Lights - 2 Front/2Rear • Cold Weather with Block Heater • 1.44 cu yd Bucket with Cutting Edge -SSL Coupler NEW HOLLAND COMPACT WHEEL LOADER — W80C HS HIGH PRODUCTIVITY BUILT ON EXPERIENCE New Holland’s C Series range of compact wheel loaders offer a fresh alternative to the traditional farm, landscape, municipal projects and material handling solutions. In addition to being an asset in other areas of the light construction industry, New Holland's line of compact wheel loaders aid in loading diet-feeders and high-sided trailers. FEATURES CLEAN ENGINE POWER The entire compact wheel loader range boasts 3.4 liter Common Rail F5H engines developed by FPT Industrial that comply with stringent Stage V emissions regulations. Advanced Common Rail technology delivers precise fueling for optimal response and has significantly reduced fuel consumption compared to previous models. This super-quiet engine provides up to 75 HP and up to 314 N·m of torque for guaranteed productivity and operator comfort. The entire range uses Diesel Oxidation Catalyst (DOC) Diesel Particulate Filter (DPF) technology for Stage V compliance, which is maintenance-free and further enhances efficiency to reduce total cost of ownership. PRESS & GO TRANSMISSION All models are equipped with hydrostatic transmissions. Press the accelerator and go, smoothly and without fuss. Maximum road speed is 21 mph when the optional high travel speed is specified, which is more than fast enough to get from A to B around the farm. With the inching & brake pedal, more power can be diverted to the loader's hydraulics without disconnecting the drive while maintaining a constant engine RPM. For tasks such as plowing snow and cold planing, the high-flow option with creep speed provides maximum hydraulic flow at a constant speed up to 3.4 mph. For greater control and performance, optional creep speed allows the operator to set the engine’s RPM independent of ground speed. SETTING NEW STANDARDS OF PRODUCTIVITY New Holland compact wheel loaders are designed to maximize productivity and minimize the time needed for servicing and attachment changeover. The line-up delivers consistently high levels of performance in every task. Operators enjoy the superior comfort of the cab, maximizing their productivity with minimum fatigue. LINKAGE VERSATILITY Two choices of linkage are available, depending on the end user's preference. Either the Z-bar linkage or the TC linkage can be specified. OPERATOR ENVIRONMENT An almost unobstructed 360-degree vision is offered by the newly designed cab. The elevated driving position and an abundance of curved glass within four narrow pillars ensure the best view of any materials handler on the market. Access via the wide-opening glass door is easy and straightforward. Operators will appreciate the bright airy space and fully opening side window and low noise levels of 71dB(A). Further comforts include 10 air vents, air conditioning, air suspended seat, tilting and telescopic steering column and many useful storage compartments. W80C HIGH SPEED New Holland C Series compact wheel loaders are the right tool for the tough jobs you do every day. Even though compact is in the name, the W80C High Speed (HS) loader delivers big power, high performance, and outstanding stability. Dependable engine and hydraulic power and an array of attachments give you all the tools to efficiently scrape, grade, and haul to the finish line. These machines are ready to work when you are. Gross HP 74 HP Operating Weight 13,668 lbs Cab Height 106 in Hinge Pin Height 11 ft 1 in. BREAKOUT TOUGH PILES New Holland's Z-Bar linkage is a rugged, simple design ideal for high-production load-and-carry applications, like moving and setting drainage pipe or stacking landscape timbers. Model W80C HS provides a maximum of 13,927 lbf in breakout force and yields a dump height of 99.3 in. Plus, lofty lifting capacities of 8,424 lb at full height, 10,644 lbs at maximum reach, and 13,746 lbs on ground. TAKE ON MORE JOBS WITH CONFIDENCE Exceptional maneuverability and a tighter turning radius are essential on equipment operating on small jobsites and in constricted spaces. The W50C TC was designed to compactly conquer due to its reduced machine length of 222 in, machine width of 73 in and operating height measuring up to 169 in. A lower center of gravity and the 88 in wheelbase increase stability on New Holland compact wheel loaders so you can lift and move larger loads, travel smoothly and quickly, and operate with more confidence. EFFICIENT, MAINTENANCE-FREE TIER 4 ENGINES With 74 gross HP and 233 ft-lb of peak torque @1400 rpm on hand, New Holland compact wheel loader W80C HS helps you work faster and more productively. Plus, New Holland compact wheel loaders offer a maintenance-free Tier 4 final solution. No maintenance means no regeneration, no expensive replacement filters, no extreme exhaust temperatures and no after-treatment fluids. These engines provide power needed to tackle challenging jobs and technology to maximize fuel efficiency and reduce emissions. When servicing is required, A tilt-up hood, ground-level access to maintenance points and long service intervals reduce the time your operators spend on routine maintenance tasks. Radiator, filters, hydraulics, oil cooler, engine — they’re all easily accessible. ELECTRO-HYDRAULIC CONVENIENCE Whether you choose a compact wheel loader with a comfortable cab or an economical ROPS platform, you’ll enjoy electro-hydraulic controls that increase bucket and boom control and provide easy vehicle-inching capability. The inch and brake pedal allows constant engine rpm power to be diverted to the loader’s hydraulics without disconnecting the drive. The hydrostatic transmission provides precise speed control with minimum shifting, so operators can focus on the task at hand. Electro-hydraulic controls provide more loader control, letting you: • Increase control of the bucket and boom, whether separately or in combined movement • Take more control over bucket-shake performance • Adjust and fine-tune operation to the way you work and increase operator comfort in all jobs • Improve control of the machine during inching, making it easier to get into optimum position on the jobsite • Take advantage of electro-hydraulic lift/tilt for even more operation proficiency • Optimize vehicle-direction inversion (smoothness vs. quickness) TOOLS THAT TACKLE TOUGH TASKS C Series compact wheel loaders are compatible with a full line of buckets, attachments and accessories available from New Holland and numerous third-party manufacturers. Whether you need a broom for landscaping, a dozer blade to move snow, or a bucket for concrete work, your New Holland dealer can help you source the right tool. Waste no time and avoid the elements by quickly switching attachments from the comfort of the cab, thanks to an integrated hydraulic quick coupler. MORE STABILITY ON THE JOB All New Holland compact wheel loaders are designed to deliver greater stability, letting you lift and move bigger loads, operate with more confidence, and travel more smoothly even in tough conditions. When moving material from stockpiles to trucks or around the jobsite, the Auto Ride control option provides a more comfortable ride on rough ground with less load spilling and wear and tear. It engages automatically when ground speed reaches 2.5 mph and automatically disengages at slower speeds for loading and unloading. Ideal for tasks such as plowing snow and cold planing, the high-flow option with creep speed provides maximum hydraulic flow at a constant speed up to 3.4 mph. For greater control and performance, optional creep speed allows the operator to set the engine’s RPM independent of ground speed. Complete the package with a front electrical socket and case drain. The return-to-dig option quickly returns the bucket to the dig position after dumping, so you’re always ready for the next operation. OPTIMIZED OPERATOR ENVIROMENT The cab on a C Series compact wheel loader packs more comfort and ease of operation into every inch. The design incorporates spacious dimensions with natural, ergonomic controls to keep you working comfortably and productively all day long. Wide steps provide easy entry and exit. The seat, steering column and armrest are adjustable, and the standard LCD display puts information just where you want it. A high-performance heater/defroster is standard. Add optional air conditioning for operator comfort on the hottest working days.

Yes

82 in

1.3 cu yd

13,184 lb

13,927 lb

9,517 lb

105 in

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Enclosed

Yes

4

LED

Joystick

Yes

Yes

Yes

74 HP

4WD

Hydrostatic

3

25 mph

Yes

235.4 in

73.2 in

105.5 in

13,184 lb