Description
Ziegler Uptime Guarantee. Cat Certified Used w/CVA + Labor, includes PT + HYD _ TECH warranty through 4/16/28 or 4,000 hours with CVA
953 HRC TRACK LOADER
COMPLETE STORAGE PROTECTION
COUNTERWEIGHT, LIGHT, 240KG
COUNTERWEIGHT,ADDITIONAL,200KG
EASY ACCESS PACKAGE
FAN, DEMAND, REVERSING
HYDRAULIC 2V,GP JOYSTICK, PACK
KIT, VISIBILITY, SINGLE CAMERA
LANE 3 ORDER
LGP PACKAGE, 12A, HDXL
Online Owner's Manual
PREMIUM CORP RADIO (24V)
SERIALIZED TECHNICAL MEDIA KIT
TANK, FUEL, STANDARD
TRACK, 31.5" DG, HDXL
Linkage: STANDARD
Guard: FRONT LIGHTS, IDLER
Antifreeze: -50C (-58F)
Oil Change System: HIGH SPEED
Bumper: STANDARD
Hydraulic Oil: STANDARD
Regional Package: USA
Air Inlet: STANDARD
Service Package: EXTENDED
Lines Implement: STANDARD
Transmission Control: V-LEVER
Equipment-certification-code: CCU
Remaining Factory Warranty
Customer Value Agreement (cva)
Cat Certified Used W/cvaSpecifications
Year2024
ManufacturerCATERPILLAR
Model953
Hours1,609
Serial NumberLTL00547
ConditionUsed
Stock NumberEQ0088365
TelematicsYes
Cold Weather PackageYes
ROPSEnclosed
Year2024|
ManufacturerCATERPILLAR|
Model953|
Hours1,609|
Serial NumberLTL00547|
ConditionUsed|
Stock NumberEQ0088365|
TelematicsYes|
Cold Weather PackageYes|
ROPSEnclosed|
Inspection Information
SERIAL NUMBERS
ATTACHMENTSN/A
ENGINE FRONT S/NN/A
ENGINE REARInfo Needed
TRANSMISSION S/NN/A
INTERIOR CAB
AIR CONDITION SYSTEMOkay/Done
AUTO SHIFTN/A
BRAKE OPERATIONALYes (Passed)
CAB FILTEROkay/Done
CLEAN CABYes
CLEAN WINDOWS & INSPECTOkay/Done
CONTROLSOkay/Done
EMS/CMS/GAUGESOkay/Done
FUEL LEVELFull
HEATING SYSTEMOkay/Done
OPERATIONAL MANUALYes (Passed)
PARKING BRAKE OPERATIONAL/ ADJUSTEDOkay/Done
PRODUCT LINK BOXYes (Passed)
RIDE CONTROLN/A
SEAT ADJUSTMENTYes (Passed)
SEAT CUSHIONYes (Passed)
TRANS CONTROLOkay/Done
WASHER FLUID & WIPER CONDITIONOkay/Done
MACHINE
ACCUM CHARGEYes (Passed)
AIR FILTERCorrected
ALL DOOR LATCHESYes (Passed)
BATTERIESYes (Passed)
BELLY PANSOkay/Done
BLOCK HEATERYes (Passed)
BOOMN/A
BRAKE FLUIDN/A
CARRIAGEN/A
CLEAN MACHINEYes
COOLANT LEVELWithin Operating Range
DAMAGE LISTEDOkay/Done
DEF LEVELFull
DRAIN AIR TANKSN/A
EDGES/TEETHOkay/Done
ENGINE OILWithin Operating Range
FAN BELTYes (Passed)
FINAL DRIVEYes (Passed)
FRONT AXELN/A
GREASE MACHINEYes (Passed)
HAMMER EQUIPPED MACHINESN/A
HYD CHARGEYes (Passed)
HYDRAULIC OILCorrect
HYDRAULIC PRESSUREYes (Passed)
IS THERE ANY HYDRAULIC/CYLINDER LEAKS? IF SO, WHERE IS THE LEAK?No
KICKOUTSN/A
LAST PM SERVICEYes
LIST ANY PSP/PIPS NEEDED ON MACHINEYes
PIVOT SHAFTN/A
REAR AXELN/A
SWING DRIVEN/A
TRACK ADJUSTMENTOkay/Done
TRACK ROLLER FRAMEOkay/Done
TRANSMISSION OILN/A
AIR FILTER CommentsHalf of the air filter is damp.
LAST PM SERVICE CommentsNo level listed.
SAFETY FEATURES
BACK UP ALARMOkay/Done
BRAKE LIGHTSN/A
GRAB HANDLESOkay/Done
HEAD LIGHTSOkay/Done
HORNOkay/Done
SAFETY LINKOkay/Done
SEAT BELT (MUST BE REPLACED EVERY 3 YEARS)Okay/Done
SMV SIGNN/A
STROBE LIGHTSN/A
TURN LIGHTSN/A
ZIEGLER/ZIEGLER RENTAL DECALS AND ID#Okay/Done
GRADE CONTROL TECHNOLOGY
3D TECHNOLOGY GRADE CONTROL EQUIPPED: AFTERMARKET OR CAT GRADE. PROCEED TO NEXT STEPS IF EQUIPMENT IS PRESENT. (SECONDARY DISPLAY IN THE MACHINE)N/A
PHYSICAL APPEARANCE
ALL CABLING CONNECTED?Yes
ALL HARDWARE INTACT?Yes
WIRING DAMAGED? FRAYS?No
WEB INTERFACE: ADMIN/SITECH#1
ARE 40 RADIO CHANNELS ENTERED? ONLY ON TD5XO TOUCH DISPLAY.N/A
ARE ALL OF THE COMPONENTS FIRMWARE UP TO DATE?N/A
ARE THE UNITS TURNED TO FT AND MPH?N/A
ARE THE VRS CREDENTIALS ENTERED? TO TEST YOU MUST BE OUTSIDE.N/A
DOES THE MODEM HAVE INTERNET?N/A
HAS THE BLADE ROTATION BEEN CALIBRATED WITHIN THE LAST YEAR?N/A
HAS THE BODY SENSOR BEEN CALIBRATED IN THE LAST YEAR? IF NO, RECALIBRATE.N/A
HAS THE PASS MATCH ADJUSTMENT BEEN CALIBRATED IN THE LAST YEAR?N/A
HAS THE VALVE CALIBRATION BEEN CALIBRATED IN THE LAST YEAR?N/A
IS THE SYSTEM ECM FIRMWARE AT 2.16 OR HIGHER?N/A
IS THERE A MACHINE FILE SAVED? ONLY ON TD5XO TOUCH DISPLAY.N/A
IS "SOFTWARE MAINTENANCE UNTIL" DATE OLDER THAN TODAY'S DATE? (IF NO, CONTACT CON TECHNOLOGY SUPPORT)N/A
MONITOR/ONBOARD DEVICES: ALL GREEN?N/A
STORAGE: ARE THE PROJECTS DELETED?N/A
WAS THE SENSOR CORRECTION CHECK PERFORMED ON EARTHWORKS MACHINE? (MUST BE PERFORMED EVERY 1,000 HOURS)N/A
MACHINE CHECK-IN OUTSIDE SHOP (PERMANENT SITE AT BRANCH REQUIRED VRS OR NETWORK ID)
CHECK BLADE TIPS/CUTTING EDGE ON CONTROL POINT (USE ROVER IF AVAILABLE)NEEDS TO BE WITHIN ONE TENTH OF A FOOT) IS IT ACCURATE?N/A
CHECK BLADE TIPS/CUTTING LENGTHS ARE CORRECTN/A
RUN AUTOMATICS BY BENCHING BLADE/BUCKET ABOVE GROUND ON HIGH THROTTLE. MOVE JOYSTICKS WHILE OPERATING TO ENSURE AUTOMATIC CORRECTION. CREATE A POSITIVE 0.5FT OFFSETN/A
SERIAL NUMBERS
ATTACHMENTSN/A|
ENGINE FRONT S/NN/A|
ENGINE REARInfo Needed|
TRANSMISSION S/NN/A|
INTERIOR CAB
AIR CONDITION SYSTEMOkay/Done|
AUTO SHIFTN/A|
BRAKE OPERATIONALYes (Passed)|
CAB FILTEROkay/Done|
CLEAN CABYes|
CLEAN WINDOWS & INSPECTOkay/Done|
CONTROLSOkay/Done|
EMS/CMS/GAUGESOkay/Done|
FUEL LEVELFull|
HEATING SYSTEMOkay/Done|
OPERATIONAL MANUALYes (Passed)|
PARKING BRAKE OPERATIONAL/ ADJUSTEDOkay/Done|
PRODUCT LINK BOXYes (Passed)|
RIDE CONTROLN/A|
SEAT ADJUSTMENTYes (Passed)|
SEAT CUSHIONYes (Passed)|
TRANS CONTROLOkay/Done|
WASHER FLUID & WIPER CONDITIONOkay/Done|
MACHINE
ACCUM CHARGEYes (Passed)|
AIR FILTERCorrected|
ALL DOOR LATCHESYes (Passed)|
BATTERIESYes (Passed)|
BELLY PANSOkay/Done|
BLOCK HEATERYes (Passed)|
BOOMN/A|
BRAKE FLUIDN/A|
CARRIAGEN/A|
CLEAN MACHINEYes|
COOLANT LEVELWithin Operating Range|
DAMAGE LISTEDOkay/Done|
DEF LEVELFull|
DRAIN AIR TANKSN/A|
EDGES/TEETHOkay/Done|
ENGINE OILWithin Operating Range|
FAN BELTYes (Passed)|
FINAL DRIVEYes (Passed)|
FRONT AXELN/A|
GREASE MACHINEYes (Passed)|
HAMMER EQUIPPED MACHINESN/A|
HYD CHARGEYes (Passed)|
HYDRAULIC OILCorrect|
HYDRAULIC PRESSUREYes (Passed)|
IS THERE ANY HYDRAULIC/CYLINDER LEAKS? IF SO, WHERE IS THE LEAK?No|
KICKOUTSN/A|
LAST PM SERVICEYes|
LIST ANY PSP/PIPS NEEDED ON MACHINEYes|
PIVOT SHAFTN/A|
REAR AXELN/A|
SWING DRIVEN/A|
TRACK ADJUSTMENTOkay/Done|
TRACK ROLLER FRAMEOkay/Done|
TRANSMISSION OILN/A|
AIR FILTER CommentsHalf of the air filter is damp.|
LAST PM SERVICE CommentsNo level listed.|
SAFETY FEATURES
BACK UP ALARMOkay/Done|
BRAKE LIGHTSN/A|
GRAB HANDLESOkay/Done|
HEAD LIGHTSOkay/Done|
HORNOkay/Done|
SAFETY LINKOkay/Done|
SEAT BELT (MUST BE REPLACED EVERY 3 YEARS)Okay/Done|
SMV SIGNN/A|
STROBE LIGHTSN/A|
TURN LIGHTSN/A|
ZIEGLER/ZIEGLER RENTAL DECALS AND ID#Okay/Done|
GRADE CONTROL TECHNOLOGY
3D TECHNOLOGY GRADE CONTROL EQUIPPED: AFTERMARKET OR CAT GRADE. PROCEED TO NEXT STEPS IF EQUIPMENT IS PRESENT. (SECONDARY DISPLAY IN THE MACHINE)N/A|
PHYSICAL APPEARANCE
ALL CABLING CONNECTED?Yes|
ALL HARDWARE INTACT?Yes|
WIRING DAMAGED? FRAYS?No|
WEB INTERFACE: ADMIN/SITECH#1
ARE 40 RADIO CHANNELS ENTERED? ONLY ON TD5XO TOUCH DISPLAY.N/A|
ARE ALL OF THE COMPONENTS FIRMWARE UP TO DATE?N/A|
ARE THE UNITS TURNED TO FT AND MPH?N/A|
ARE THE VRS CREDENTIALS ENTERED? TO TEST YOU MUST BE OUTSIDE.N/A|
DOES THE MODEM HAVE INTERNET?N/A|
HAS THE BLADE ROTATION BEEN CALIBRATED WITHIN THE LAST YEAR?N/A|
HAS THE BODY SENSOR BEEN CALIBRATED IN THE LAST YEAR? IF NO, RECALIBRATE.N/A|
HAS THE PASS MATCH ADJUSTMENT BEEN CALIBRATED IN THE LAST YEAR?N/A|
HAS THE VALVE CALIBRATION BEEN CALIBRATED IN THE LAST YEAR?N/A|
IS THE SYSTEM ECM FIRMWARE AT 2.16 OR HIGHER?N/A|
IS THERE A MACHINE FILE SAVED? ONLY ON TD5XO TOUCH DISPLAY.N/A|
IS "SOFTWARE MAINTENANCE UNTIL" DATE OLDER THAN TODAY'S DATE? (IF NO, CONTACT CON TECHNOLOGY SUPPORT)N/A|
MONITOR/ONBOARD DEVICES: ALL GREEN?N/A|
STORAGE: ARE THE PROJECTS DELETED?N/A|
WAS THE SENSOR CORRECTION CHECK PERFORMED ON EARTHWORKS MACHINE? (MUST BE PERFORMED EVERY 1,000 HOURS)N/A|
MACHINE CHECK-IN OUTSIDE SHOP (PERMANENT SITE AT BRANCH REQUIRED VRS OR NETWORK ID)
CHECK BLADE TIPS/CUTTING EDGE ON CONTROL POINT (USE ROVER IF AVAILABLE)NEEDS TO BE WITHIN ONE TENTH OF A FOOT) IS IT ACCURATE?N/A|
CHECK BLADE TIPS/CUTTING LENGTHS ARE CORRECTN/A|
RUN AUTOMATICS BY BENCHING BLADE/BUCKET ABOVE GROUND ON HIGH THROTTLE. MOVE JOYSTICKS WHILE OPERATING TO ENSURE AUTOMATIC CORRECTION. CREATE A POSITIVE 0.5FT OFFSETN/A|
