Werner Implement Co., Inc. - Vermillion, Minnesota

New Baumalight 1P 24 24" 3 pt. stump grinder, 540 PTO drive with slip clutch, requires 20 up to 45 HP. Weighs 350 lbs. Works best with hydrostatic drive tractor. Lists at $3,990. We have two units ...

New Baumalight Stump Blaster S18-S450 universal skid steer mount stump grinder, 24" diameter rotor with 34 replaceable teeth, up to 10" cutting depth below ground, 5" maximum cutting depth per pass...

New Baumalight S24-S445 SSL hydraulic drive stump grinder, 15-25 GPM, has swing cylinder, with 12-volt diverter to allow control of the hydraulic swing cylinder, cutting depth is up to 15" below gr...

Used Baumalight S24-S445 SSL hydraulic-drive stump grinder, 15-25 GPM, has swing cylinder, with 12-volt diverter to allow control of the hydraulic swing cylinder, cutting depth is up to 15" below g...

New CID XBC 72LF 72" X-Treme SSL cutter, hoses with flat-face couplers, requires 14 to 20 gpm flow, 6" diameter cut capacity, three bidirectional blades, 100 hp. right-angle gearbox. Weighs 1,390 lbs.

New CID SBCNS piston motor swing boom SSL cutter, 17-30 GPM is required, 44" cut, 4" cutting capacity, requires case drain, 96" reach when extended horizontally, vertical reach of 16', cutter can a...

New CID TPP X-Treme heavy duty tree/post puller with hoses and flat-face couplers; pulls post up to 8" diameter and trees up to 6" diameter. We have one unit in stock. Please call for details ...

New CID XBC72 MF-MT 72" X-Treme SSL brush cutter with mulching teeth, 6" diameter cutting capacity, three bi-directional blades, 100 HP right angle gear box, requires 20-30 GPM, hoses with flat fac...

New 2024 Walco Douglas 72-RD (item #: 175043) 72" rear discharge finish mower, Cat I 3 pt. with floating linkage, 540 PTO, 3 blades. Requires approximately 25 hp. Gray color. Note: This finish mow...

Used 2024 Peruzzo USA SS220 87" skid steer loader direct-drive flail mower with optional rear roller, high flow requires 32 to 40 GPM, oversized greaseable SKF bearings, high speed rotor is equippe...

New Precision Manufacturing TC6451extreme duty telescoping tree clipper, fully plumbed with flat-face couplers, 36" telescoping clipper head rotates 180 degrees using wireless remote, universal SSL...

New Taylor Pittsburgh 233-S-400-P Cat I 3 pt. 540 PTO seeder/spreader, polyethylene hopper, three spread patterns, adjustable uniform spreading rates, greaseable gearbox with shielded PTO shaft. Sp...

New USAGEAR two-bale hydraulically adjustable bale fork. Has four spears with usable length of 44". Universal skid steer loader mount. Includes cylinder/hoses/flat face couplers. Cylinder has an 18...

New USAgear two-bale round bale fork. Includes six spears. Top two spears have usable length of 36 inches. Four lower tines have usable length of 44 inches. A sleeve is welded in place on lower bar...

New Virnig AD36H SSL post hole auger drive unit with planetary gear reduction, 2" hex output shaft (also available with 2 9⁄16" round output shaft model #AD36R). Includes hoses with flat face coupl...

New Virnig ADHT36H High-Torque SSL post hole auger drive unit with planetary gear reduction, 2" hex output shaft. Includes hoses with flat face couplers, bi-directional auger rotation. Requires 15...

New Virnig ADV36 post hole auger drive with planetary gear reduction with 2" hex output shaft. Weighs 350 lbs. Complete with hoses and flat-face couplers (less auger bit). Auger bits available in s...

New Virnig BBC72-25-C V40 72" closed front SSL rotary cutter, standard flow 18-25 GPM, three 1/2" X 4" updraft blades, Eaton direct-drive motor, hoses with flat face couplers, single front chain gu...

New Virnig BSGV72 V40 72" skeleton bucket with two cylinder independent grapples, open end design with optional cylinder guards, hoses with flat face couplers. Weighs 815 lbs. Lists @ $4,515. We h...

New Virnig BSGV84 V40 84" skeleton bucket with two cylinder independent grapples, open end design with optional cylinder guards, hoses with flat face couplers. Weighs 860 lbs. Lists @ $4,675. We no...

New Virnig IRC78-25 78" V60 open front industrial cutter, 8.0" cut capacity, standard flow 20-25 GPM (also available in three high flow models: 25-32 GPM/32-39 GPM/39-45 GPM), replaceable skid shoe...

Used Virnig ISG78 78" scrap grapple bucket, 2-cylinder independent grapples, 5/8" X 8" bolt-on reversible cutting edge, has five structural wear bars under bucket. Very clean, well-cared-for bucket...

New Virnig LCG84 V60 large capacity skeleton grapple bucket, 62.8" jaw opening, 46" overall depth, 12 tines, tines are ½" thick, 7.1" spacing between tines, cylinder guards, recommended for SSL gre...

New Virnig LLV72 72" land leveler with bolt-on reversible/replaceable cutting edge. Weighs 710 lbs. Lists @ $3,445. Note: Both land levelers have been sold, but additional units are available. Plea...

New Virnig LLV78 78" land leveler with two 5/8" X 8" bolt-on reversible/replaceable cutting edge, 51.5" overall depth. Weighs 790 lbs. Hydraulic scarifier ready. Lists @ $3,785. We have one unit in...

New Virnig LLV84 84" land leveler. Bolt-on reversible/replaceable cutting edge. Also available in 90" width. Weighs 820 lbs. Lists @ $4,050. We have one unit in stock. Please call for details. T...

New Virnig RBC84-25-O V50 84" open front cutter, standard flow 18-25 GPM, 6" diameter cutting capacity, includes hoses with flat face couplers, case drain hose with flat face male coupler, three ...

New Virnig SRGV78-0 V50 78" skeleton rock grapple bucket, with hoses and flat face couplers, 2.9" spacing between tines, bucket depth of 42.9", open end sides, weighs 1,080 lbs., recommended for SS...